Portable power stations give you the freedom to go anywhere, providing stable power while exploring outdoors, peace of mind during emergencies, and keeping renewable energy with you.
So how do you choose the generator that best suits your needs?
A quick comparison of the Ampace series of products will show that they are similar in core functions, but each has advantages in specific application scenarios.
|
|
 |
 |
 |
|
Capacity |
1462Wh |
584Wh |
266Wh |
|
Recharging Time |
55mins |
1hour (0-80%) |
45mins (0-80%) |
|
AC Outlets |
4 |
2 |
2 |
|
USB Output Ports |
USB-A (x4) USB-C (x2) |
USB-A (x2) USB-C (x2) |
USB-A (x2) USB-C (x1) |
|
Ideal Usage |
Reliable home backup power, RV Travel |
Reliable emergency power when traveling and hiking |
Backup power for small devices when camping or going out |
In this article, we will better assist you in choosing the appropriate Ampace portable station based on your needs. First of all, the key factor that helps us decide on a mobile charging station is the battery capacity.
Battery Capacity and Power Supply Duration
Battery capacity determines how much electrical energy a device can store, thereby influencing its operating time.
The following are the battery capacities of different series：
Andes 1500: 1462Wh - Suitable for scenarios requiring long-term power supply and simultaneous operation of multiple high-power household appliances, such as home backup power or camping.
Andes 600 Pro: 584Wh - Appropriate for moderate power demands, suitable for emergency backup and powering small daily devices.
Andes 300: 266Wh - More suitable for lightweight use, such as short trips or powering only a few low-power devices.
If you frequently require long-term power supply or simultaneous operation of multiple high-power devices, the high-capacity Andes 1500 is clearly more suitable; while if it's mainly for occasional backup or powering only a few small devices, a smaller capacity model might be sufficient.
Compatibility and Compatible Devices
The proportion of compatible household appliances is another important factor.
The Andes 1500 can support 99% of household appliances, which clearly aligns with its product positioning. This means it can meet the power demands of most devices, including those with high requirements for voltage and current, whether for home use or RV living. It can provide power for all the household appliances you want to operate.
The compatibility ratio between Andes 600 Pro and Andes 300 is 80%, which may have limitations in the use of some high-demand devices. However, this does not mean you will miss out on them. In outdoor and emergency scenarios, portability makes up for this deficiency.
Outputs and Inputs
In the Ampace mobile power station, there are many interfaces similar to those commonly used in your home. These are very universal interfaces, allowing you to enjoy a convenient charging experience at any time. All Ampace portable charging stations are equipped with more than two USB output ports, making it convenient for you to run multiple electrical appliances simultaneously.
The USB interface is an important way to charge small electronic devices such as smartphones, tablets, cameras, etc. Ampace has prepared several universal USB interfaces for users:
USB-A Output Port
This is the most common type of USB interface and is widely used in most devices.
Output power: Generally supports an output of around 5V/2A, which is sufficient to meet the charging needs of most common devices.
Applicable scenarios: If your device uses a traditional USB cable (Type-A interface), this interface can provide stable charging support.
USB-C Output Port
Features: A new generation interface with a reversible insertion design, making it more convenient.
Charging and data transmission: Supports higher voltage and current, usually enabling faster charging speeds, and is also suitable for high-speed data transmission.
Applicable scenarios: More and more new devices (such as some smartphones and laptops) are adopting the USB-C interface. Choosing power stations that support USB-C can better meet the needs of these devices.
Calculate your electricity needs
When choosing the right mobile charging station, you may need to calculate your electricity needs, and let's take a camping trip as an example to calculate the electricity you may need to use.
We can use this formula to estimate your electricity demand:
- Run time = (battery capacity x efficiency factor)/total load
Battery capacity:
The Ampace Andes 1500, for example, has a capacity of 1462 Wh.
Factors of efficiency:
In order to consider the actual losses in the inverter and conversion process, we apply an efficiency factor. Typical values are about 0.9 (or 90%).
Total load:
For camping, let's assume that your equipment consumes the following power:
Laptop: 60w
LED beaded light: 20w
Smartphone charger: 10w
Add these up and the total load is 60 + 20 + 10 = 90w.
- Running time = (1462 Wh × 0.9) / 90w≈14.6 hours
According to estimates, the Andean 1500 can power your device for about 14.6 hours. Of course, you may use more electronic devices while camping, and you can calculate according to your needs in order to match your specific situation. Keep in mind that actual uptime may vary due to factors such as battery life, temperature, and fluctuations in device power consumption.
Ampace Warranty for Reliable Protection
When choosing a portable power station, warranty policy is an important factor in ensuring a long-term experience. Ampace is committed to providing users with reliable products and high-quality after-sales support, so that you can use it without worry.
The Ampace Andes 1500 comes with a 5-year warranty, providing even greater protection for long-term use. The Andes 600 Pro and Andes 300 also come with a 3-year warranty to ensure stable service support in a variety of application scenarios. Whether for daily use or outdoor adventure, Ampace's solid warranty policy gives you peace of mind on every journey.
